PLC
PLC Control Panels
Multi-motor sequencing with PLC and relay interface — up to 50 forward/reverse feeders, each contactor labelled by the motor it drives.
We build control panels the way a maintenance engineer would want to find them — every wire ferruled to the drawing, every contactor labelled by the motor it drives. Plus the machines, the hydraulics and the solar that go with them.
Get a quote Send a drawing or load list — same-day reply
Every panel starts as an AutoCAD general arrangement, is wire-ferruled to the drawing, load tested in our workshop, and handed over with the as-built drawing.
Multi-motor sequencing with PLC and relay interface — up to 50 forward/reverse feeders, each contactor labelled by the motor it drives.
Multi-feeder MCC and PCC panels with ACB incomer, busbar chamber and DOL, star-delta or VFD starter modules.
Automatic power factor correction with staged capacitor banks — the one panel in your plant that pays for itself.
We build the machine, not just its panel. Multi-spindle drilling and tapping stations with pneumatic fixtures and tooling.
Tank, pump, valve bank and gauge built to your duty cycle — with the electrical control from the same workshop.
Pressure control, duty/standby changeover, dry run protection. Danfoss, Delta and ABB drives.
MCCB incomer, marked cable alley, insulated busbar chamber. Every feeder labelled, feeder by feeder.
Numbered to the layout drawing, vented and key-locked. The unglamorous part that decides how a plant is maintained.
Full EPC, not just supply. Structure, mounting, string wiring, LT panel and commissioning — one team, one handover.
We also build DG synchronizing panels, PCC panels and servo voltage stabilizers. If it needs an enclosure and a control scheme, ask us.
Most of our work comes from plants that were let down by a panel that failed in its first summer. We build the way a maintenance engineer would want to open it three years later.
Every panel starts as an AutoCAD general arrangement — busbar chambers, cable alleys, feeder ratings — sized to your load, not a copied template.
Every wire numbered to the drawing. Terminal blocks labelled. No guessing during a breakdown.
The panel is powered up and run in our workshop before it ever reaches your site.
Installed, PLC logic loaded, operators walked through it, as-built drawing handed over.
Faridabad based. If a panel we built stops, we are on your floor — not on hold.
GA drawing first
Ferruled & labelled
Operator layout
Wrapped for dispatchAnyone can quote you panels per watt. We do the part that decides whether the plant still generates in year seven — structure spacing, roof loading, string design, earthing, and a commissioned LT panel at the end of it.
Structure & alignment
Full harness on roof
Module laying
LT panel commissionedAuthorised Solar Solution Provider for Luminous. Mono and poly modules, factory sheds and RCC rooftops. Read more about our solar EPC →
Components we build with
Send a load list, a single line diagram, or just describe the machine. We reply the same day.